Finish | Antique Iron |
---|---|
Metal | Cast Iron |
Size | 1.5" |
Polished by gradual rubbing of leather we bring to your our antique iron finish. It is a solid knob which looks great in antique iron finish. After polishing we can either use a transparent layer of lacquer or use wax paste. Supplied as a piece with a 40 MM long M4 screw.
Knob 36 MM X 26 MM, Projection 32 MM.
Finish | Antique Iron |
---|---|
Metal | Cast Iron |
Size | 1.5" |
A larger version of the 35 MM oval cabinet knob (SKU : Z1452) and heavier. Can be used in conjunction with the small oval knobs to complete them. This is supplied with or without the rose.
Finely polished brass never goes out of style. A great knob for your cabinets. Supplied as a set of knob and base with a 40 MM long M4 screw.
Knob 34 MM X 34 MM, Projection 41 MM, Plate 35 MM.
Not a smooth looking knob. It rather has a slightly rough textured surface. A blend of contemporary and antique, this knob if the choice of antique lovers.
Knob 35 MM X 25 MM.
This is a matchless piece. Available in three sizes 20 MM, 30 MM and 40 MM (SKU : Z1450). Solid, hand worked and oil rubbed. The marks on the top are made by hand using a hammer. This knob is first turned smooth, beaten on top and then finished in the royal oil rubbed patina. You just have to install and leave to develop a tarnished look over the time.
A reeded cabinet knob. This comes with a rose where the knob sits. Fully polished by hand and lacquered. Supplied as a set with a 40 MM long M4 screw.
Another design from our latest assortment. This knob comes supplied in two sizes small and large. Supplied with a 40 MM long M4 screw.
Knob 38 MM X 38 MM, Projection 42 MM.
Now isn’t this a great product. This comes from our brand new brass range. This can be supplied with a base plate (See our SKU : Z1429) where the knob sits on a similar design but larger backplate. The cylindrical cross section of the knob can be changed to square and the slot on the backplate can also be made square accordingly. Supplied as a set of knob and backplate with matching screws for the plate and a 40 MM long M4 screw for the knob.
Knob 55 MM X 29 MM, Backplate 98 MM X 33 MM, Projection 39 MM.
A solid heavy duty product. This knob comes from our latest collection. Supplied as a piece with a 40 MM long M4 screw. Longer screws are also available for thicker woods.
Diameter 40 MM, Projection 44 MM.
If you have a question about any products on the site plz contact us.